Which is used for grinding calcined petroleum coke pulverizer? How to process calcined petroleum coke into powder?

Home / News

Petroleum coke is the "waste" at the end of petroleum refining process, it can be used as glass fuel instead of heavy oil after grinding and processing by the mill (the general demand is 200 mesh). Compared with heavy oil, petroleum coke is cheap and easy to obtain, which can not only greatly reduce the production cost of glass industry, but also open up a new way to use waste energy, and respond to the national policy of developing circular economy.

Petroleum coke processing and pulverizing process:
After being crushed, the petroleum coke is grinded by the MTW European mill to produce petroleum coke powder that meets the requirements of customers, it is quantitatively, continuously, evenly and stably injected into the kiln by the conveying system for combustion.
The combustion temperature of petroleum coke powder in the glass furnace can reach or approach the flame temperature of heavy oil combustion of 1650-1730 ℃, the ash content is the same as that of heavy oil, and sulfur powder is lower than coal tar.

Advantages of MTW European mill in petroleum coke pulverizing:
1. In view of the characteristics of petroleum coke with light specific gravity and difficult to form a powder and abrasive layer, MTW European Mill has optimized the structure of the main machine grinding device and the blade, and adopted the structure design of the cage turbine classifier, which improves the output and does not have large particles in the finished product, and can ensure that the system can run stably for a long time.
2. For the internal thin oil lubrication system, the oil is usually changed once every 4 months, which greatly improves the equipment utilization rate, reduces the downtime and maintenance time, and reduces the cost.
3. Good environmental protection effect, the dust collector adopts the American off-line dust removal technology, which can ensure the dust removal effect, the cloth bag adopts the oil and water repellent membrane filter bag (applicable to the powder with strong adhesion, such as petroleum coke, asphalt, etc) and increases the filter area of the dust collector, the adhesion of the powder on the cloth bag is small, and the whole machine adopts the fully enclosed negative pressure operation. The production environment is clean, without dust pollution, and the dust emission is less than 20mg/m3, which meets the national environmental protection requirements.
4. Good safety performance, as petroleum coke is used as fuel, it is dangerous to some extent. SMMVIK Machinery, combined with its experience in pulverized coal and other industries, is equipped with explosion relief devices on the equipment to improve the safety of the equipment.