Both cone crusher and impact crusher are fine crushing equipment in mine crushing, but the selection of impact crusher in crushing hard ore rock will cause plate hammer and impact plate wear, greatly increasing the production cost. On the contrary, cone crusher uses the lamination principle to crush materials. The wearing rate of vulnerable parts of cone crusher is low, but the finished products are uniform in size and excellent in particle type, The production cost has been greatly reduced.
When crushing materials with medium hardness and above, such as granite, basalt, quartzite, iron ore, cobble, etc., the cone crusher has high crushing ratio, high production efficiency, and excellent grain size of the finished product. Moreover, due to the technical parameters of the cone crusher, reliable operation and low operating cost, the vulnerable parts of the cone crusher have wear resistance protection, which reduces the maintenance cost of the cone crusher to a lower limit, The service life can be increased by more than 30%, which greatly reduces the production cost compared with the impact crusher.
The cone crusher produced by SMMVIK Machinery is mainly used in the two-stage crusher and the three-stage crusher in the processing of metal mines and construction sand. The cone crusher is more used in the production line of river pebbles, basalt and granite machine-made sand, reducing the cost of these sand production lines and improving the production output.
