For crusher users, if they want to make the equipment operate as much as possible, then each equipment has its own service life. We won't let the equipment work endlessly day and night. Take the impact crusher as an example, how far will the crushing equipment reach a greater degree of wear and tear? How to reduce the wear of crusher?
The service life of the impact crusher is limited, and the major problem of the impact crusher is wear. In the case of impact operation, the alloy lining plate will exceed the service life in long-time work, and the metal utilization rate of the impact crusher plate hammer can be as high as 48%. Then at this time, the materials crushed by the impact crusher will be uneven, and the wear of the hammer head will be more serious, and the metal utilization rate of the hammer head is only about 20%, The rotor body itself may also be subject to wear. The bottom sieve plate of the crusher is seriously affected by wear, and the work of replacing the sieve plate is also more complex.
It can be seen from the above analysis that in order to reduce the wear degree of impact crusher, on the one hand, high chromium with good material should be selected as vulnerable parts. Such as the plate hammer of impact crusher and the manufacturing material of impact plate, so this impact crusher is more difficult to be worn, and the enterprises using this crusher do not need to replace these vulnerable parts frequently, which saves the cost of enterprises to a certain extent.
On the other hand, when the impact crusher is crushing, it is more important to do a good job in the lubrication of the crusher. In the case of lubrication in place, the service life of the impact crusher can be prolonged. The appearance of gears, bearings, liners and other parts between the impact crusher chassis is smooth, with pressure tension smooth and sealed. Therefore, it can be seen that the lubrication and maintenance of the impact crusher is also very critical.
In the process of using the crusher, we should also pay attention to avoid the overloaded operation of the impact crusher, The broken material is high hardness material. If they are not replaced or repaired in time, the production of the impact crusher will be seriously reduced, so we need to pay attention to the lubrication and maintenance of the equipment. Only a more reasonable and scientific use of the impact crusher can effectively extend its service life, Avoid replacing accessories when the machine reaches a high degree of wear.
