The stone crusher is a machine designed to reduce large rocks into smaller rocks, gravel, or dust. This type of crusher is usually used in the mining industry to crush ore, coal, or other materials into small pieces. However, the stone crusher can also be used in the construction industry to crush rocks and other materials.
There are several types of crushers available for mining operations. Crushing is the first stage in the process of mineral processing where the ore from the mine site is fed into a crusher to reduced size. The common types of crushers used are:
Jaw Crusher: A Jaw Crusher is one of the main types of primary crushers in an ore processing or a mining plant. A Jaw Crusher lessens large size rocks or ore by having placed the rock into compression. A jaw crusher is typically used as the primary crusher in a crushing circuit. It uses compressive force to break material by pressing it between two jaws, one fixed and one moving. The moving jaw plates continue to crush material until it's small enough to fall through the opening at the bottom of the jaw.
Cone Crusher: A cone crusher works similar to a gyratory crusher, except that it has a smaller cone and smaller receiving opening. The material is compressed between two cones, one rotating and one stationary, until it's crushed into smaller pieces that fall through to the bottom.
Impact Crusher: An impact crusher breaks up materials using either high speed hammers or slow-moving metal anvils that repeatedly hit and bounce back against a hard surface inside the chamber. Horizontal shaft impact crushers typically use high speed hammers to crush soft and medium-hard materials.
Gyratory Crusher: A gyratory crusher breaks rocks by squeezing them between a non-spinning cone (called a concave) and an outer shell (called a mantle). The action produces compression that crushes the rock. The crushed material exits at the bottom of the machine between two jaws, called tramp release cylinders.
VSI sand making machine: The VSI sand making machine is widely used for crushing of hard and crispy materials, such as rocks, grinding materials, refractory materials, cement clinkers, quartzite, iron ores and concrete aggregates. The VSI sand making machine has following features:
1.VSI sand making machine can be used to crush the raw materials into the desired size directly so that it simplifies the process of next stage crushing.
2.With it's unique feature of "rock on rock" crushing, it drastically reduces wear expenses and increases product life span.
3.It can quickly change between different types of materials without any loss in efficiency or performance.
4.The crushed product has a cubical shape with minimum flakiness.
The crusher capacity is based on the client's requirement. The crusher has been designed for a capacity of up to 100 tph. However, the client can choose to increase or decrease the capacity based on their needs. The crusher comes with a primary jaw crusher, secondary cone crusher, and tertiary impact crusher. If you are interested in our equipment, you are welcome to consult, and we look forward to your arrival.
