Replace the traditional grinding roller and grinding ring with wear-resistant alloy materials, which can improve the wear resistance of the parts and reduce the frequency of replacement, thus improving the production efficiency. Third, optimize the air flow system. Clean the pipeline and cyclone collector regularly to ensure the smooth flow of air flow, which can improve the classification efficiency and collection efficiency of the powder.
In addition to improving the production efficiency through process optimization, the selection of high-quality raw materials is also very important. The moisture content of gypsum raw materials should be controlled below 5%, because too high moisture content will cause the material to agglomerate in the mill, affecting the grinding effect and production efficiency. If the moisture content of the raw materials is too high, a dryer can be added before the milling process to dry the raw materials, ensuring the normal operation of the Raymond mill.
Compared with other milling equipment, Raymond mill has obvious advantages in the production of 100mesh gypsum powder for small and medium-sized enterprises. Its investment cost is only 1/3-1/2 of that of vertical roller mill, and the operation and maintenance are simple, which is suitable for small and medium-sized enterprises with limited funds and small output demand. At the same time, Raymond mill can also be used for the milling of other non-metallic minerals, such as limestone, kaolin, etc., with strong versatility.
The 100mesh gypsum powder produced by Raymond mill has stable quality and meets the national standards for building materials. It is widely used in the construction industry. For example, in the production of gypsum board, 100mesh gypsum powder can ensure the compactness and strength of the gypsum board; in the production of gypsum mortar, 100mesh gypsum powder can improve the workability and adhesion of the mortar. With the continuous development of the construction industry, the demand for 100mesh gypsum powder is increasing, and Raymond mill will continue to play an important role in the gypsum milling industry.
