With the increasing demand for sand and gravel, the crusher is also getting more and more attention. Then which materials are more suitable for crushing with different models of crusher? Here is an introduction:
Jaw crusher uses the principle of mutual extrusion of jaw plates to process materials, it is used in the first process of crushing various ores and rocks. It can process various ores with compressive strength not higher than 320MPa to medium size at one time. It is widely used in mining, metallurgy, chemical industry, building materials, power, water conservancy, transportation and other fields.
The jaw crusher is of curved extrusion type, and its operation principle mainly simulates the movement of two jaws of animals. When working, the motor drives the belt and pulley to make the moving jaw move up and down through the eccentric shaft. When the moving jaw rises, the included angle between the bracket plate and the moving jaw becomes larger, so as to drive the moving jaw plate to approach the fixed jaw plate. The material can be broken multiple times through the extrusion, rubbing, grinding, etc. between the two jaw plates.
The impact crusher has more advantages than other types of crushers. It is composed of seven parts, including feed, distributor, whirling crushing chamber, impeller experience, main shaft assembly, base drive device and motor. Impact crusher is widely used for fine crushing and coarse grinding of metal and non-metallic ores, cement, refractories, abrasives, glass raw materials, building aggregates, artificial sand and various metallurgical slags.
Especially for medium hard and abrasive materials, such as silicon carbide, carborundum, sintered bauxite, magnesia, etc. The impact crusher is used together with the hydraulic protection jaw crusher, which can handle various metallurgical slags. It is suitable for building sand and road sand.
Cone crusher is widely used in metallurgical industry, building materials industry, road building industry, chemical industry and silicic acid industry. It is suitable for crushing all kinds of ores and rocks with medium or above hardness. It has the advantages of large crushing force, high efficiency, high handling capacity, low operation cost, convenient adjustment, and economic use.
Due to the reasonable material selection and structural design of the parts, the service life is long, and the particle size of the crushed products is uniform, which reduces the cycle load. In medium and large size crushers, hydraulic cavity cleaning system is used, which reduces the downtime. There are many cavities for each type of crusher. Users can select different cavities according to different needs, so as to better meet the requirements of users.
If you want to know more about the crusher, you can contact our online customer service. We have professional customer service personnel to introduce it to you. We look forward to your arrival.
