What are the factors that affect the working efficiency of stone crusher?

Home / News

There are many types of crushers, and the equipment crushed by different crushers is very different. The equipment dedicated to crushing stones is also called stone crushers. Sometimes stone crushers will have various problems in the process of crushing. The old and new of the stone crusher are related, sometimes not necessarily related to the equipment but also related to the stone.

The first is the hardness of the crushed stone. The stone crushed by the stone crusher is generally a material with high hardness. If the stone is hard, it will be more difficult to break, and it will also cause wear and tear to the vulnerable parts of the equipment. If the wear is serious, the crushing speed will be slower and the crushing capacity will be smaller.

In addition to the hardness of the stone, it is also related to the humidity. Although it is said that the harder the stone is, the more difficult it is to break, but if the moisture of the stone is too high, it is easy to stick to the crusher cavity during the crushing process, and at the same time affect the crushing effect, and the phenomenon of blockage will also occur in the process of discharging.

During the operation of the stone crusher, it will be produced according to the needs of customers. Some customers require large particle size, so it will be easier to crush. Some require fine stones, so it will take a long time to complete the operation of the stone crusher.

There is also the problem of the equipment itself. The stone crusher is composed of parts, such as hammers, jaws, bearings and other parts. The better the effect of these parts, the greater the crushing ability. If the parts do not awesome, the crushing capacity will be affected during operation.

When the stone crusher is used to crush materials, the more fine powder in the stone, the crushing will be affected. The fine powder is easy to adhere to the crushing chamber. Therefore, during crushing, the stone with a large amount of fine powder should be screened to avoid excessive content of fine powder.