What are the factors that affect the decline of sand making machine output?

Home / News

As a common source equipment of sand and gravel aggregate, sand making machine has made contributions to urban infrastructure projects. However, in the process of using, the output of sand making machine often decreases. The low efficiency of sand making machine will lead to the production of sand not reaching the expected standard, which will further affect the sales of finished aggregate.

Now let's analyze the reasons for the decline in the output of the sand making machine:
1. Start with the characteristics of processing materials.
The water content of the material will also affect the output of the sand making machine. Analyze the composition and elements of the material, so as to accurately determine whether it meets the production requirements of the sand making machine. When the water content is too large, the fine-grained material will agglomerate or stick to the coarse-grained material due to the increase of humidity, thereby increasing the viscosity of the material and reducing the discharge speed, which leads to a decline in productivity. In serious cases, it may even cause blockage of the discharge port.
2. Whether the sand making machine motor is worn.
We know that the motor is the power source of the engine equipment, which is the same reason with the car refueling. If the power is insufficient, the operation speed will not keep up, and the power of the sand making machine will not meet the normal production demand, resulting in excessive return and reduced output.
3. Check inside the equipment to see if there is any foreign matter in the crushing chamber.
If there is no problem with the materials processed by the equipment, another important reason may be that the block stones are stuck in the crushing chamber, and some relatively hard materials are easy to wear out the chamber. If there is such a reason, it should be removed in time to avoid damage to the sand making machine and the decline of production.
4. Whether the auxiliary equipment is configured reasonably.
We know that the sand production line is generally equipped with a complete set of equipment. If there is a problem with one equipment, such as jaw crusher, feeder, vibrating screen, etc, it will affect the efficiency of cooperation, so we need to configure reasonable supporting equipment, and each equipment should be coordinated and unified in terms of material processing capacity, so as to avoid low efficiency.
5. Users' needs are objective factors.
Due to the different processing output required by each user, the finer the particle size of the finished product required, the greater the test of the sand making machine. In this way, the time of the whole sand making process will be longer, and the corresponding difficulty will be higher, resulting in the decline of the output of the sand making machine equipment.

The output of the sand making machine has decreased, but the energy consumption per unit time has not decreased, which not only affects the progress of the whole project, but also increases the production cost of users, which is not conducive to users to obtain competitive advantage in the market. Therefore, both manufacturers and users need to pay attention to the possible problems of the sand making machine. If the output has decreased, we should analyze the causes in time, find the root causes and solve them in time.