We often say that the common materials for metal ore processing include iron ore, copper ore, bauxite, zinc ore, etc. generally, these metal ores are mainly processed through beneficiation, crushing and then grinding. Because these processes are relatively complex and there are many equipment used, some problems are inevitable in the production process. If we encounter problems, we need to summarize them to improve the overall production efficiency.
Common problems of ore pulverizer:
1. Repair the wear of grinding roller bearing of ore mill. For metal ore, a good grinding roller device is undoubtedly a driving force for operation. Generally, the use time of the grinding roller should not exceed 500 hours, and attention should be paid to replacement. Here, it is mainly to clean the rolling bearings in the roll sleeve, and then replace the damaged parts. The wear repair can be completed by manually adding oil or borrowing a grease gun.
2. Repair and replace wearing parts such as grinding roller, grinding ring and blade of metal ore mill. The grinding machine for processing metal ore needs a certain time to be overhauled, and the wearing parts such as grinding ring blade should be repaired and replaced. Before and after use, the connecting bolt and nut plug should be carefully checked to see whether the lubricating grease is added to the position and whether there is looseness.
3. The problem of tooth breakage of bevel gear in reducer of metal ore mill. Since the axial movement of the gear reducer is the main reason for the broken teeth of the bevel gear when the metal ore pulverizer is processing gold ore, the relative movement between the shaft sleeve and the shaft due to inertia, the material hardness of the parts on the shaft is inconsistent. Poor operation skills for equipment use, resulting in an increase in the number of reducers that start and stop the mill.
4. We should also pay attention to the fact that before the installation of the ore mill, the operators must receive technical training, so that they can understand the principle and performance of the mill, be familiar with the operating procedures, avoid some basic mistakes, and avoid encountering simple problems that cannot be solved.
Our company strictly controls the gold ore processing process, If customers have any problems in the use of the pulverizer, they can consult us. SMMVIK Machinery has a professional equipment production and research team, and has a good understanding and analysis of metal ore pulverizing equipment. The maintenance of vulnerable parts of the ore pulverizer must not be sloppy. In order to reduce the problems on the production line, we should take these problems seriously.
