As an important member of the mining machinery and equipment, the maintenance of the sand making machine is essential. Some customers report that the quality of the sand making machine is poor and not durable. After the field investigation, the results show that the operators do not pay attention to the daily maintenance of the sand making machine, and the service life of the sand making machine is shortened due to improper operation. Therefore, the sand making machine should not only be maintained during use, but also before use and after shutdown. The development of construction demand has led to the rapid development of sand making equipment, the sand making equipment has powerful functions. With the current development speed of sand making equipment, even the most powerful sand making machine will be scrapped. Here are a few tips to improve the service life of sand making equipment, which can be carried out only under the conditions of long-term maintenance and regular maintenance of sand making machine.
If the operator can master some basic maintenance methods of the sand making machine, the sand making machine will not only operate more smoothly, but also increase its service life, save unnecessary investment for the owner, and then generate benefits. In order to keep the sand making equipment in good condition and repair it in time in case of failure, it is very important to insist on regular maintenance, regular inspection and maintenance can eliminate many failures.
Every time the sand making machine is started up, all parts shall be carefully checked, and attention shall be paid to whether the lubrication status of each lubrication point of the sand making machine equipment is good, and clean lubricating grease shall be used. If the material contains a lot of moisture during transportation, it is easy to stick in the sand making equipment and cause blockage, and the sand making equipment will be damaged. Therefore, the humidity and viscosity of the material should be appropriate. The fineness of the material shall meet the material requirements of the sand making equipment. If the produced material does not meet the requirements, it will cause the loss of the sand making equipment. Screening the material in advance will not affect the normal operation of the sand making equipment. Do not transport materials with great hardness to the sand making equipment, which will shorten the service life of the sand making equipment. The production mode of sand making equipment can break large pieces of materials into fine sand under the action of high-speed centrifugation, it should be used together with the sand washer to remove the dust, mud powder and other impurities generated by the crushing impact.
The maintenance of the sand making machine is very important, at the same time, it is also necessary to select high-quality sand making machine equipment. SMMVIK Machinery is an enterprise that produces sand making machines, it has many years of experience in producing and operating sand making machines,the sand making machine operates continuously in a long-term and high-intensity production environment with high work efficiency, so it can produce good economic benefits.
