With the increasing demand for sand and stone in the development of the construction industry, the stone sand making machine is more and more widely used. Through this sand making machine, the stone can be quickly crushed and produced into sand suitable for building construction. However, sometimes one or another problems will be encountered in the use process, which will not only affect the sand making efficiency, but also affect the service life of the equipment.
So what should we pay attention to when we use the stone sand making machine? Let's take a look:
It is forbidden to start or stop the machine when there are materials in it. Starting the machine when there are materials will increase the operating load of the equipment, and seriously damage the parts of the equipment. Iron materials shall not be contained in the stone, otherwise the equipment will be damaged.If abnormal sound occurs during the use of the sand making machine, the machine should be shut down to check the cause of abnormal sound, and the fault can be removed before use. It is forbidden to check or adjust the equipment when the sand making machine is running.
Do not enter into the crushing chamber the large stones that exceed the requirements of the equipment, the feeding shall be continuous and uniform. Do not accumulate stones in the crushing chamber. When stopping the machine, wait until the stones in the crushing chamber are completely crushed.
The above is the relevant knowledge of using the sand making machine. I hope it will be helpful to you.
