The application scope of the ore superfine mill is generally calcium carbonate powder processing, pulverized coal processing, non-metallic ore powder processing, power plant desulfurization, etc. The processing materials are generally limestone, calcite, calcium carbonate, dolomite, barite, talc, gypsum, quartz stone, bentonite, etc. The ore superfine mill, also known as ore powder mill, stone powder mill and stone powder processing equipment, is the core product of the grinding production line. However, if there is a higher requirement for fineness, the ultra-fine powder mill should be considered.
The performance characteristics of the ore superfine mill: low energy consumption, high output, more than double the output of the ordinary mill when the finished product fineness and motor power are the same. The wearing parts have a long service life because the grinding rolls and rings are forged with special materials.
The long service life is 2-5 times longer than the wear parts of impact crusher under the condition of the same fineness of materials and finished products, generally more than one year. The real reason for high safety and reliability is that there is no rolling bearing or screw in the grinding chamber, so there is no problem that the bearing and its seals are vulnerable, and there is no problem that the screws are easy to loosen and damage the machine. The product has high fineness, environmental protection and cleanness.
The working environment and precautions of the ore superfine mill are as follows:
Clean the equipment. After a long time of work, the mill is easy to have dirt that needs to be cleaned. During the cleaning process, do not use a high-pressure and high-temperature water gun to wash, so as to avoid burning electrical appliances.
Selection and replacement of oil: the fuel system shall also be cleaned during cleaning, and the fuel transfer pump shall be checked to see whether it is normal to eliminate hidden troubles. The replacement shall be determined according to the usage.
Maintenance of parts: During the operation of the grinder, each part has different temperatures according to the different work contents. There is a cooling system in the equipment. During maintenance, pay attention not to make the water tank in the cooling system have sediment of mud and sand. If it is found, it needs to be removed in time. Besides, the water temperature in the water tank cannot be too high or too low, and antifreeze needs to be added in the water tank.
