The mobile crushing station has compact equipment and flexible operation, which can better meet the crushing operation of urban construction waste. The effective dust removal system and pre screening device greatly improve the crushing efficiency. The design concept of the mobile crushing station is to eliminate the obstacles brought by the crushing site and environment to the crushing operation of customers as the primary objective, and truly provide customers with efficient and low-cost operating facilities.
The current mobile crushing station is mostly used in the construction waste treatment project in urban demolition. It is the foundation of the project to realize the recycling of construction waste by crushing and screening the construction waste into several different sizes and rules. Of course, some problems will be encountered in the process of use. Therefore, we need to maintain it in daily use to ensure the normal and stable operation of the equipment.
Machine maintenance is a very important and frequent work, which should be connected with the operation and maintenance of the machine. There shall be professional personnel for inspection and maintenance to ensure the normal operation of the machine, avoid machine failures and accidents, and delay the progress of the production site.
Maintenance measures for mobile crushing station:
1. Note that all components of the machine are working properly.
2. The installation of new tires is easy to loosen, so it must be checked regularly.
3. Pay attention to the wear degree of the worn parts and replace the worn parts at any time.
4. When the oil temperature rises, people should stop checking the causes and remove the obstacles.
5. The dust on the bottom frame should be removed. To prevent the machine from being broken, the bearing cannot move on the chassis.
6. If the transmission gear has impact noise during operation, people should stop the machine to check and solve the problem.
7. Good lubrication is closely related to the service life of the bearing and directly affects the service life and running speed of the machine. The lubricating oil must be clean and well sealed.
