The impact crusher is a common fine crusher and shaping machine equipment in mine crushing, but just like the so-called "no one is perfect", the equipment is also the same. In order to provide customers with better equipment, SMMVIK Machinery continuously improves the equipment according to the problems that users respond to. After repeated research by SMMVIK Machinery, the following suggestions are given for the common maintenance and fault response strategies of the impact crusher:
1. If the bearing of the impact crusher is found to be hot, this situation may be caused by the lack of oil in the bearing, so what we need to do is to add oil in time. Of course, too much oil will also make the bearing hot, so be sure to check the oil level when adding oil. Replace the bearing in time when the bearing is damaged. When the upper cover is too tight, adjust the bolts and adhere to the principle of moderate tightness.
2. If the vibration of the impact crusher is abnormal, the abnormal vibration of the impact crusher indicates that the material is too large. We can check the feed size. Uneven wear indicates that the hammer head of the impact crusher needs to be replaced, the rotor imbalance needs to be adjusted, and the foundation bolts need to be checked and reinforced if the foundation is not properly treated.
3. If the belt of the impact crusher is found to be overturned, it means that the belt is worn, which requires replacement of the triangular belt. Because of the problem of the belt transportation equipment, the pulley needs to be adjusted on the same plane. Pay attention to the quality of the triangular belt itself.
4. If the discharge grain of the impact crusher is found to be too large, it indicates that the hammer head is worn and needs to be idled or replaced. Another case is that the oversized feed grain will also affect the discharge grain size. The clearance between the hammer head and the impact plate is generally adjusted to 15-20mm.
SMMVIK Machinery is a manufacturer specializing in the production of impact crusher. The impact crusher produced by SMMVIK Machinery is characterized by high crushing ratio, low energy consumption, large production capacity, and excellent particle size, which is widely praised by users. If you are interested in our equipment, welcome your consultation, and we look forward to your arrival.
