Impact crusher is a new generation of crushing products with international level developed by SMMVIK by absorbing the cutting-edge technology of international impact crusher. At present, the impact crusher has been widely used in metallurgy, mining, cement, chemical industry, refractories, ceramics and other industries. It is very suitable for crushing all kinds of soft and medium hard ores in coarse, medium and fine degrees. It plays an important role in the fields of highway construction, hydraulic engineering, building gravel, machine-made sand processing and so on.
Once the impact crusher breaks down in the process of use, it will affect the production of the whole production line, and then cause great losses to the enterprise. In order to resume production as soon as possible, it is necessary to learn to quickly deal with the common faults of the crusher and reduce of the crusher faults. As a leader in the domestic crusher field, SMMVIK Machinery has sorted out several common crusher fault handling methods for your reference!
1. If found in the crusher belt overturned. It means that the belt is worn, and the triangular belt needs to be replaced. Because of the problem of belt conveyor assembly, the pulley needs to be adjusted on the same plane, and the quality of the triangular belt itself must be paid attention to.
2. If it is found that the discharge particle of the impact crusher is too large. It indicates that the hammer head is worn, so it needs to be idle or replaced. The gap between the hammer head and the impact plate is too large, which is generally adjusted to 15 ~ 20mm. Too large feeding particles will also affect the discharging particle size.
3. Abnormal vibration of impact crusher is found. It indicates that the material is too large. You can check the feeding size. Uneven wear indicates that the impact hammer head needs to be replaced, and the rotor is unbalanced and needs to be adjusted.
4. If the crusher bearing is found to be hot. It means that the bearing is short of oil and needs to be refueled in time. Of course, too much refuelling will also make the bearing hot. When refuelling, be sure to check the oil level. If the bearing is damaged, replace the bearing in time. If the upper cover is too tight, adjust the bolt tightness appropriately.
SMMVIK Machinery has jaw crusher, cone crusher, mobile crushing station and other crushing equipment production base and crusher production process. SMMVIK Machinery welcomes new and old customers to visit the company. For details, please contact our customer service staff, or leave your contact information, and our staff will contact you as soon as possible.
