Calcite can be divided into various types of stone powder according to the fineness after being processed by a pulverizer. Calcite can also be used to produce cement in the construction industry after being processed. Of course, this is due to the contribution of a pulverizer, It is particularly important to choose a good pulverizer.
Here we recommend the LUM ultra-fine vertical mill for you. The processed calcite ore powder can be used as a flux in the metallurgical industry and in the construction industry to produce cement and lime. Also used in plastic, paper and other industries. When processing any kind of material, the pulverizer should pay attention to the following points:
1. The rolling bearing of calcite mill is heated. Causes and solutions: if the oil quantity is insufficient, fill it up in time. If the oil quality is poor, replace the oil. If the assembly is too tight, adjust it. If the belt is too tight, loosen it.
2. Check the bearing temperature frequently. If the temperature is too high, check whether the lubrication and transmission parts are normal, and whether the rolling distance is too tight. Find out the causes in time and take corresponding measures. If the situation is serious, stop the machine for inspection.
3. Check the tightness of the transmission belt of the pulverizer. If the belt is too loose, it will reduce the transmission efficiency and affect the grinding effect. If it is too tight, it is easy to cause bearing heating, increase power consumption and reduce the service life of the transmission belt.
4. The lower part of the toothed plate of the pulverizer is seriously worn. You can change the discharge particle size of the product by adjusting the ore discharge port, reducing the size of the ore discharge port, or replacing the crushing toothed plate by 180 degrees.
The particle size of ore powder processed by the ultra-fine pulverizer is between 80-325 mesh, which can also be adjusted according to requirements. The output of different types of pulverizers is also different. According to the selection of different types of pulverizing equipment to process the required mineral materials, calcite is processed here. According to our analysis, it is very suitable to choose the LUM vertical ultra-fine pulverizer.
